Haimes,
R. and Merchant, A., “The Synergistic Use of CAD for Tightly
Coupled Analysis and Design”, AIAA Paper 2005-4986, June
2005.
Fudge,
D., Zingg, D. and Haimes, R., “A CAD-Free and a CAD-Based
Geometry Control System for Aerodynamic Shape Optimization”,
AIAA Paper 2005-0451, Jan. 2005.
Manning,
T., Gage, P., Nguyen, J., and Haimes, R., “ComGeom2: A Geometry
Tool for Multidisciplinary Analysis and Data Sharing”, Proceedings
of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization
Conference, AIAA 2004-4303. Albany NY, Aug. 2004.
Nemec,
M., Aftosmis, M., and Pulliam, T., “CAD-Based Aerodynamic
Design of Complex Configurations Using a Cartesian Method”,
AIAA Paper 2004-0113, Jan. 2004.
Crawford,
C. and Haimes, R., “Synthesizing an MDO Architecture in
CAD”, AIAA Paper 2004-0281, Jan. 2004.
Haimes,
R. and Crawford C., “Unified Geometry Access for Analysis
and Design”, Proceedings of the 12th International Meshing
Roundtable, Santa Fe, NM, September 2003.
Alonso,
J., Martins. J., Reuther, J., Haimes, R. and Crawford, C., “High-Fidelity
Aero-Structural Design Using a Parametric CAD-Based Model”,
Proceedings of the 16th AIAA Computational Fluid Dynamics Conference,
AIAA 2003-3429. Orlando FL, June 2003.
Deremaux,
Y., Willcox, K. and Haimes, R., “Physically-Based, Real-Time
Visualization and Constraint Analysis in Multidisciplinary Design
Optimization”, Proceedings of the 16th AIAA Computational
Fluid Dynamics Conference, AIAA Paper 2003-3876. Orlando FL, June
2003.
Merchant,
A., Haimes, R., “A CAD-Based Blade Geometry Model for Turbomachinery
Aero Design Systems”, ASME Paper GT 2003-30369, July 2003.
Dannenhoffer, J. and Haimes, R., “Using Quilts and Chains
to Improve Structured and Unstructured Surface Grids”, AIAA
Paper 2004-0610, Jan. 2004.
Haimes,
R. and Aftosmis, M., “Watertight Anisotropic Surface Meshing
Using Quadrilateral Patches”, Proceedings of the 13th International
Meshing Roundtable, Williamsburg, VA, September 2004.
Haimes,
R. and Aftosmis, M., “On Generating High-Quality Water-Tight
Triangulations Directly from CAD”, Proceedings of the 8th
International Conference on Numerical Grid Generation in Computational
Field Simulations, Honolulu, Hawaii, June 2002.
Aftosmis,
M., Delanaye, M. and Haimes R., “Automatic Generation of
CFD-Ready Surface
Triangulations from CAD Geometry”, AIAA Paper 99-0776, Jan.
1999.
|
